Bosch Solution 6000 status icons explained.

A clear, scannable reference for every icon on your Bosch 6000 keypad. What each status icon means when it is on, off, or flashing, plus the red and green LED lights. Updated for current Bosch alarm system keypad models.

Ray Large
Written by Ray Mitcherson

Founder ยท Client Relations and Estimating, Alltronic

With nearly 50 years in the industry, founder Ray Mitcherson remains active in the business, leading client relations and estimating at Alltronic.

Older Bosch 6000 Keypad(with lid)
OLDER BOSCH 6000 KEYPAD (WITH LID)
Bosch Solution 6000 alarm system keypad
NEWER BOSCH 6000 KEYPAD
ASIAL Platinum Member
ASIAL Platinum Member
Master Electricians Accredited
Quick Reference

What each icon on your keypad actually means.

If your Bosch Solution 6000 keypad is showing an icon you don’t recognise, this page is your Bosch 6000 cheat sheet. It covers every status icon, what it means when it is lit, off, or flashing, the meaning of the red and green LED lights, and the small variations between older and newer keypad models.

Note for newer keypads:ย Some icons appear slightly different on more recent Bosch Solution 6000 keypads. For example, the open hand icon now shows as a tick. The meaning is the same. Where this applies, we have noted it on the relevant icon below.
The icons

Every status icon, explained.

Bosch 6000 keypad area numbers 1 to 8

Area numbers 1 to 8

Area status
The area is turned All On or Part On.
The area is turned off.
The area has an alarm.
What is an area?

The keypad can be programmed to show numbers 1 to 8 so you can see at a glance which areas are armed. Most systems only use a single area, so these numbers are not always visible. For a full breakdown of what each area does, see our guide toย Bosch Solution 6000 zone types.

Bosch 6000 keypad power icon

Power

Plug and cord

System power is normal.
System power is missing. The system is running on backup battery.
About the backup battery

When the power icon flashes, your system is drawing from the backup battery. Read aboutย how long an alarm system backup battery lastsย so you know when it’s time to replace it.

Bosch 6000 keypad fire alarm icon

Fire

Fire alarm status

A fire alarm has occurred and is held in memory. Turn the area All On and then Off to clear.

No fire alarm.

A fire alarm is currently active.

Bosch 6000 keypad service or trouble icon

Service or trouble

Exclamation mark in a triangle

A service or trouble condition has been acknowledged.

No service or trouble conditions.

A service or trouble condition is present and has not yet been acknowledged.
Want to know what the trouble is?

The triangle icon tells you a fault exists. To find out what it is, see our guide toย Bosch 6000 system trouble messages and what they mean.

Bosch 6000 keypad ready to arm icon

Open hand

Ready to arm

The area is ready to be armed. All zones are sealed.
Not ready. A zone is open (e.g. a door or window left open, or a detector still active).
Newer keypad models

On more recent keypads, the open hand icon appears as a tick symbol. The meaning is the same.

Bosch 6000 keypad person inside house Part On icon

Person inside the house

Part On indicator

The area is turned Part On. You are inside the house with the perimeter armed.

The area is not turned Part On.
How Part On works

When the person is inside the house, this icon shows you are using Part On (perimeter armed, interior detectors bypassed).

Bosch 6000 keypad person outside house All On icon

Person outside the house

All On indicator

The area is turned All On. The whole system is armed and you are outside the house.

The area is not turned All On.

How All On works

When the person is outside the house, it tells you the whole system is armed.

Bosch 6000 keypad open padlock disarmed icon

Open padlock

System disarmed

The system is disarmed.
Open padlock

The open and closed padlock icons work as a pair. When the system is disarmed you see the open padlock.

Bosch 6000 keypad closed padlock armed icon

Closed padlock

System armed

The system is armed (All On or Part On).

Closed padlock

The closed and open padlock icons work as a pair. When the system is armed it switches to the closed padlock.

Bosch 6000 keypad Wi-Fi connected icon

Wi-Fi connected

Network connection active

The system is connected to Wi-Fi.
Wi-Fi connected
When you see this symbol, your Wi-Fi is connected and online. It is what lets a monitored alarm communicate over the NBN.
Bosch 6000 keypad Wi-Fi not connected icon

Wi-Fi not connected

Network connection lost

A line or cross through the Wi-Fi symbol means the system is not detecting Wi-Fi.
What to do if you see this

If the Wi-Fi icon has a line through it, your system has lost its connection to the network. Check that your router is powered on and broadcasting. If the issue continues, call us.

Keypad LED lights

Red and green LEDs.

The LED lights on your keypad let you see the system status from a distance, before you can read the icons. There are also a few flashing states worth knowing about.

Red ยท Steady

System armed

A steady red light means the system is armed.

Red ยท Flashing

Alarm in a 24-hour zone

An alarm has occurred in a 24-hour zone, such as a fire alarm or panic button.

Green ยท Steady

Disarmed and ready

The system is disarmed and all zones are sealed. Ready to arm.
Green ยท Flashing

Disarmed, a zone is unsealed

The system is disarmed but a zone is unsealed (e.g. a door open or a detector triggered).

Not sure what your keypad is telling you? Talk to our Brisbane team and we will help you read it.

Common questions

Frequently asked questions.

The questions we get asked most often about the Bosch 6000 keypad and what its icons are telling you.

Two indicators tell you at a glance. The red LED light combined with the closed padlock icon means the system is armed. The green LED light combined with the open padlock icon means the system is disarmed. From a distance you can use just the light colour. Up close, the padlock icon confirms it. If you are not sure of the steps to actually disarm the system, our guide onย how to disarm your security alarmย walks you through it.

The triangle with an exclamation mark is the service or trouble icon. When it is flashing, the system has detected a fault that has not yet been acknowledged. When it is on steadily, the fault has been acknowledged but may still need to be resolved. When it is off, there are no service conditions to report.

A flashing red LED means an alarm has occurred in a 24-hour zone. That usually means a fire alarm has triggered or a panic button has been activated. This is different from a steady red light, which simply means the system is armed. If you see a flashing red light and you don’t know what caused it, call us before disarming the system.

The service or trouble icon (the triangle with an exclamation mark) flashes when the system has detected a fault. The exact procedure to clear it depends on the cause. Common causes include a low backup battery, a faulty zone, or a power supply issue. For a breakdown of what each fault is, see our guide toย trouble messages and what they mean. If the icon keeps appearing, give us a call. We can usually identify the issue over the phone.

A beeping keypad usually means the system is signalling a fault. Most often that is a low backup battery, a recent power outage, or a service condition that needs acknowledging. Entering your user code will sometimes silence the beep, but the underlying cause still needs to be addressed. For more detail on the common causes, seeย why your security alarm system is beeping. If the beeping continues, call us and we will work out what is triggering it.

There are a few different kinds of “reset” depending on what you are trying to do. Cycling the system off and on can clear an alarm condition. A full panel reset usually requires an installer code and is best done by a technician. If you are trying to reset the system after an alarm activation and are not sure how to proceed, call us.

A Wi-Fi icon with a line or cross through it means the system has lost its connection to your network. The first thing to check is your router. Make sure it is powered on and broadcasting. A quick router restart often fixes it. If the icon stays disconnected after that, give us a call.

Background

How the Bosch Solution 6000 keypad communicates with you.

The Bosch Solution 6000 is one of the most widely installed residential and commercial alarm systems in Australia. The keypad is designed to give you status information in three ways at once: through the icons on the screen, through the red and green LED lights, and through any text shown on the display. If you are weighing up models, we also coverย choosing between the Bosch 3000 or Bosch 6000.

The lights are designed to be readable from a distance. Walking past the keypad, a red light tells you the system is armed and a green light tells you it is disarmed. Once you are close enough to read the icons, you can see the additional detail: which area is armed, whether the system is fully on or part on, and whether there are any service conditions.

Older versus newer keypads

The icon meanings are consistent across all Bosch Solution 6000 keypads, regardless of model age. Some icons appear slightly different on newer keypads. The open hand icon, for example, may show as a tick rather than the original hand symbol. The meanings remain the same.

If something is not behaving the way you expect

If your keypad is showing an icon or flashing pattern that does not match what you see on this page, or if you have a service or trouble condition you cannot clear, get in touch. We have been installing and servicing Bosch systems across Brisbane and the Sunshine Coast since 1992 and we can usually identify the issue over the phone.

For the full picture on your system’s capabilities, our Bosch alarm systems page covers the Solution 6000, the app and monitoring options.

Get more from your system

Why the Bosch Solution 6000 is worth understanding.

The Bosch Solution 6000 is one of the most reliable alarm platforms installed across Australian homes and businesses. It communicates clearly through its keypad icons, LED lights, and text display, which is why we built this guide.

But you don’t always need to walk to the keypad to check your system. The MyAlarm iFob app connects directly to your Bosch 6000 and puts the same information in your hand. Arm and disarm remotely, check zone and area status, get instant fault and alarm alerts, and review your event history from anywhere.

It works over both IP and 4G, so alerts still reach you even during an internet outage. If you manage multiple properties, you can control them all from one app. Most existing Bosch 6000 systems can be upgraded to work with the app without a full system replacement.

My Alarm App New
Need a hand?

Talk to a Bosch specialist.

If your alarm is showing something unusual, or you would like a service visit, our team has been working with Bosch systems for over 30 years. We design, install and serviceย residential alarm systemsย across Brisbane and the Sunshine Coast. Call us or send an enquiry.

Why Alltronic
01
Over 30 years
Servicing Bosch alarm systems across Brisbane and the Sunshine Coast.
02
ASIAL Platinum Member
Australia’s peak security industry accreditation.
03
1,400+ sites
Monitored nationally with rapid response.
04
A1 Grade Monitoring
Available on the Bosch systems we monitor.
05
Security Licence 4226262
Fully licensed and insured.
Please fill out the form with your enquiry and our helpful team will get back to you as soon as possible.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
About this guide

Talk to a Bosch specialist.

Tell us what your keypad is doing and our Brisbane team will point you the right way.

What you'll get
Over 30 years on Bosch systems
Installing and servicing the Solution 6000 since 1992.
Often solved over the phone

We can usually identify a fault or icon from your description.

Local Brisbane & Sunshine Coast team
A service visit booked when it needs hands on the panel.
A1 Grade Monitoring available

Upgrade paths for app control and back-to-base monitoring.

MORE FROM ALLTRONIC
CONTACT US

Tell us what your keypad is showing.

Drop us a message, our Brisbane team replies within one business day.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

or call 07 3353 3248

Security Licence 4226262 ยท ASIAL Platinum Member. We’ll only use your details to respond to this enquiry.

Share This

Select your desired option below to share a direct link to this page.
Your friends or family will thank you later.